Brief Introduction of MVR evaporator
Working Principle:MVR is short of for (Mechanical Vapor Recompression), It uses the secondary steam and energy generated by the evaporation system itself to pass the low-grade (lower temperature and pressure) steam through the mechanical work of the
查看详细>>
Brief Introduction of TVR evaporator
Working Principle:TVR steam thermal recompression technology is short for (Thermal Vapor Recompression). MVR uses a steam compressor to do extra work to increase the temperature and pressure of the secondary steam. TVR heat pump consumes the heat energy of high-pressure steam,
查看详细>>
Brief Introduction of MEE Multi-effect Evaporator
Working Principle: In industrial production, it is often necessary to evaporate a large amount of water and consume a large amount of energy to heat the water to produce steam, which is then condensed to achieve the purpose of evaporating water. This steam contains a lot of latent heat,
查看详细>>
Brief introduction of rising film evaporator
Fundamental:The rising film evaporator, also called the long tube vertical evaporator (LTV), or Kestner evaporator, was widely used before the mid-1980s, after which the falling film evaporator took the lead. The principle of the rising film evaporator is shown in the figure below. The heating chamber
查看详细>>
Brief introduction of falling film evaporator
Fundamental:The film formation of the feed liquid in the falling film evaporator is completely different from that of the rising film evaporator. As shown in the figure below, there is a feed liquid distributor on the top of the falling film evaporator. Its function is to evenly distribute the feed to each falling film evaporator.
查看详细>>